In India, there are still a vast number of people that use borewell or boring water for drinking, especially in the rural areas of the country. Although borewell water is naturally clean and almost fit for drinking. There are still some issues with the water such as the hardness, presence of heavy metals, and also there’s always a risk of bacteria, viruses, and all that.
So, our concern is how we can make the borewell water and boring water perfect for drinking. Well, the simplest answer is by using a Water Purifier, right? But which type of Water Purifier will be the best suitable for this purpose since water purifiers come in a lot of varieties and each one of them is quite different from each other. That’s what we are here to find out, so, in case you are curious to know that too, be with us and read the article thoroughly until the end.
Is Borewell Water Safe for Drinking?
After a lot of studies and research, the US Department of Interior and the Water Quality Association have officially said that borewell water is fit for drinking, but there are certain conditions as well. Since borewell and boring water is naturally hard, you can drink it without any problem as hard water does not cause any harm to our body.
At the same time, you should also know that in certain regions, the concentration of hard metals in water like arsenic can be high. And, such hard metals make the water slightly unfit for drinking.
Thus, it is advised to use the right water purifier that can remove hardness from the borewell water to make it fit for drinking. So, how can you be sure about the quality of water in your region? The answer is quite simple, check the TDS (Total Dissolved Solids) level of the water using a TDS metre.
What is the TDS of Borewell Water?
On average, the TDS level of borewell water across India is measured to be 300 PPM. Generally, when we measure the TDS level of water, any number beyond 200 signifies hard water.
However, as this 300 PPM is the average value, your region’s borewell water might have 500 PPM or maybe the better one, 200 PPM. So, this range of 200-500 PPM will decide what type of Water Purifier you should be picking for your household.
Although water up to 900 PPM is considered to be fair for drinking, anything above that falls into the poor water category. So, the next task for us is to pick the right choice of Water Purifier for your household that is capable of removing all the contaminations from it and also the heavy metals.
What Type of Water Purifier is Best for Borewell Water?
If the TDS is 500PPM or more
While some people in rural regions prefer the taste of borewell water, some people from urban regions can’t bear it. For such people, a combination of RO and UV Purifier will work the best since UV purifier will take care of all the germs, and the RO will help to remove the hardness from the water and also improve its taste at the same time. This combination of RO and UV Water Purifier is highly advisable for the regions where TDS level of Borewell or Boring water is around 500PPM or more.
If the TDS is below 500PPM
If the quality of water in your region is slightly better and the TDS metre shows around 300-400 PPM rating for it, but the water tastes bad because of the contaminants, a basic RO water purifier is the right choice to go with. RO purifiers perform actually when it comes to separating contaminants and hardness from the water. At the same time, since the hardness and contaminants are removed during the process, the taste of the water improves as well.
If the TDS is below 300 PPM
Talking about the regions where borewell water quality is already good, and have a TDS level of below 300 PPM. Then, you are lucky, and using a normal gravity-based Water Purifier will be good enough for you. The Gravity-based purifiers also have an activated carbon section that deals with all the germs and contamination elements present inside the water. But, note that these purifiers don’t improve the taste of the water and neither remove the hardness. So, if you want the water with an improved taste, RO Water Purifier is perfect for this job.
Frequently Asked Questions
If you are asking to use the rejected water again for purification, no, that won’t work. However, there are plenty of other areas where this rejected water can be reused. Since the water is not fit for drinking, you can still use it to water your plants, wash cars, clean utensils, mopping the floor, etc.
Firstly, the water with low TDS levels such as below 300PPM is soft water, so it does not need any treatment that other purifiers like RO offer. Hence, the only thing left to deal with is some germs and other contaminants. That can be done in Gravity-based Water Purifiers well. Secondly, Gravity-based Water Purifiers are very affordable and work without electricity.
Yes, there are certain methods that you can try out. The one old trick that works every time is boiling the water before drinking. However, if you are looking for other methods, using Iodine tablets and drops of chlorine can significantly improve the water quality. On the other hand, you can kill the germs in water by throwing UV light rays on the water and use a water filter, later on, to keep the dirt separated.
From all this, we can conclude that you should choose a Water Purifier depending on the quality of borewell water you are using. For the water with less hardness, there’s usually no need to use expensive Water Purifiers. However, not everyone is lucky to have 200PPM water everywhere in India.
So, if we are asked to pick one type of purifier that can work for all kinds of borewell water, we would pick a Water Purifier that uses both RO and UV technology as it is the best combination for removing all types of impurities from the bore water. If your complaint is about the foul smell of borewell water, the RO and UV combination will take care of that too, and also improve the taste as well. This is it, in case of any further queries or suggestions, feel free to reach out to us using the comments section below.