Be it for a beginner or professional, using a good quality skateboard is important to learn or improve skating skills.
Skating regularly helps your kids to burn off extra energy, maintain healthy weight, and strengthen their growing muscles.
Not all skateboards are suitable for your kid. After a thorough research, we have mentioned certain important factors to consider while purchasing a skate board.
Skateboards are available in 4 different types – standard, cruiser, mini and long boards. Mini skateboards are suitable for kids below 9 years of age. Standard skateboards are suitable for beginners (adults and teenagers). Cruiser and long boards are suitable for professionals.
- Deck Size
Deck is the place where you place your feet to control the feet. If sufficient space is not there, then balancing the skate becomes difficult. You can decide the appropriate size based on your shoe size. If your shoe size is between 6.5 to 9, then go for a skateboard that is 7.5 to 8 inches wide. But if you wear large size shoes (9.5 or larger), then we recommend 8 to 8.5 inch wide deck size.
We recommend you to take a skateboard that offers the highest capacity. Like if it is for a teenager then one that allows up to 60 to 70 kg weight is good. But, if you are an adult then we advise you to go for a board that can take up to 100 kg weight.
Other information on how to choose a skateboard is mentioned in our “BUYING GUIDE“. We have mentioned detail information that helps you choose the right one.
Also, we have also picked the 7 Best Skateboards in India after analyzing, reviewing and testing them.
Best Skateboards in India
|Name||Material||Size||Maximum Weight Capacity||Buy Now|
|Strauss Bronx Ft Skateboard||Maple wood||31 X 8 inches||100 kg||CHECK ON AMAZON|
|Nivia Skateboard||Wood||31 X 8 inches||60 – 65 kg||CHECK ON AMAZON|
|Jaspo Ride on Penny Board||Polypropylene (high quality Plastic)||22.5 X 5.5 inches||60 – 65 kg||CHECK ON AMAZON|
|Iris Complete Cruiser Skateboard||Polypropylene||57 X 15 cm||85 kg||CHECK ON AMAZON|
|Klapp Fiber Material Skateboards||Fiber||20 X 4 inches||110 kg||CHECK ON AMAZON|
|Sprugal Skateboard||Wood||31 X 8 inches||75 kg||CHECK ON AMAZON|
|Oxelo Mid-Tattoo Skateboard||Maple Wood||31 X 7.75 inches||90 – 100 kg||CHECK ON AMAZON|
Reviews of Best Skateboards in India
Strauss is one of the best manufacturers in skateboards and produces quality skateboards and this Bronx FT skateboard is one among them. It comes by pairing quality components with some great eye-attractive graphics. The best standard carbon ball bearings will ensure an uninterrupted and smooth skateboarding. If you’re beginner or one who loves skateboarding, then simply go head and grab this durable and attractive skateboard.
It comes with 31 inches long, 8 inches wide deck with 3 inches truck height & 5 inches wide trucks (made with solid steel) and a firm wooden base, which is covered with stylish graphics on both the sides of the skate will provide a safe and secure footing. An evenly distributed weight of this product will make the skateboarding as their fun activity with its smooth ride. The artistic graphic on the board will make it look stylish and unique.
The durable PU wheel with high speed bearing, spacer and screw of this board will make it use in multi-conditions like park, street or pool. This skateboard comes with 8-layers cold pressed maple deck, high density waterproof emery grip tape, chromium steel bearing, skid-proof wheels, aluminum alloy baseplate and hanger. The maximum weight bearing capacity of this board is up to 100 kg and the board size is 31X8 inches.
Things we liked:
- The high-quality carbon ball bearing will provide a smooth and uninterrupted ride.
- The colorful graphics on this skateboard will make it look stylish and attractive.
- The wooden base with excellent finish won’t give away.
- The 8-layer cold pressed maple wood deck and non-slip grip tape of this skateboard will make it use rough and tough.
- Good for beginners and designed to use by adult users but not for kids.
- Value for money
Things we didn’t like:
- The adhesive isn’t good which makes the grip tape come off after a few usages.
- It is used only for learning but not for doing tricks or stunts.
- The soft bushing will make you cause a wheel-bite.
Nivia is known for making quality skateboards which makes it easy for beginners to roll around and balance easily. This skateboard comes with easy to handle board that provides complete comfortable for beginners to learn the skating.
The artistic and iconic graphics on the skateboard will make a good impression while you ride on it. The high-quality ball bearings on the wheels will ensure the user to have a safe and smooth ride. The deck is lightweight and smooth that allows you to ride on easily and its unique and stylish skate deck design will give a good feel under the feet. It is a versatile traditional street board that is apt for beginners for learning and practicing the skating.
Its wood construction, optimal size, shape, and design will make it one of the best skate boards around. The size of the board is 31X8 inches. The anti-skidding layer will help to hold the feet properly. The durable wheel, high speed bearing, screw and nut will make it strong and durable.
The maximum weight bearing capacity of this board is about 60 – 65 kg. It provides proper balance on any smooth surfaces like wood, tiles, marble flooring, etc. The firm wooden base with sturdy grip tape will make use rough and tough during practice sessions.
Things we liked:
- The high-quality ball bearings will offer a smooth and uninterrupted ride.
- Artistic graphics on the board will make it look attractive and beautiful.
- Excellent for beginners for learning and practice sessions.
- It is sturdy and durable product.
- Value for money.
Things we didn’t like:
- The deck quality & wheel movement is not up to the mark.
- The board is not for tricks but just for learning.
Jaspo ride on penny board is an ultimate compact street board that comes in vibrant color schemes and 70’s retro styling that makes this skateboard a great combination of fun and exercise. It is well built to provide a safe, comfortable and suitable riding for any level of riders (for both kids and teenagers). It is portable and allows you to stand out in the crowd easily.
This skateboard made with polypropylene material and comes in fully assembled in which you can simply open the box and use it directly. The perfect size with sharp turns and small surface area, it let you get around the place and never gets in the way and fits properly in your backpack.
The maximum load ability of this skateboard is 60 kgs and it comes with size of 22.5 X 5.5 inches (length 56 cm X width 15 cm). The super soft bushings (85A), 22X6 inch fresh pp deck, abec – 7 high speed bearings, high tensile bolts, high rebound PU wheels (60X45) with anti-skid surface will make it strong and durable.
Things we liked:
- The built quality is good.
- It is sturdy, strong, durable and comfortable to ride.
- Looks stylish and attractive with multicolor wheels that your teenage kid will love to flaunt and learn skating effectively.
- The soft bearing of the wheel will make it easy to glide and ride, even in rough surfaces.
Things we didn’t like:
- Need to work on wheel movements and ball bearings.
- Small size not ideal for adults (only for children)
IRIS skateboards come with different types of colors and HD printed graphics that looks attractive and encourage the user to practice skating. It has strong base plate with suspension shockers that provide safety and security to the user while skating and also enhance its long life. It comes in size of 57 x 15 cm (medium size) with maximum weight bearing capacity of 85 kg
The sturdy deck is constructed with non-bendable and durable polypropylene that lasts longer and it adds stability and comfort to the user’s riding experience. The colorful light up wheels will attractive one’s attention and look awesome. The LED lights come in different colors.
The 4 casters are made up of resistant PU for long lasting use. The large and soft high-speed ball bearings will support the skateboard and make it move smoothly on different street surfaces. Although, there is no need for batteries but the friction shines in the move. This board comes in fully assembled / ready to ride and ideal to use for children, teenagers and youth (both for boys and girls).
Things we liked:
- It is a complete skateboard with multi-color light-up wheels.
- The colorful HD printed graphics with LED light up wheels will attract the children and allow them to learn the skating.
- It is compactible and portable that can be used anywhere (on any street surfaces).
- The deck is sturdy, strong and durable which makes the board work for longer time.
- It provides safe, stable and comfortable riding.
Things we didn’t like:
- A little bit pricey product
- Not meant for adults (above 18 years age group).
This Klapp skateboards is ideal to use for kids and teenagers, who want to learn skating (beginners). The PVC wheels with soft ball bearing of this skate scooter will allow the user to have a safe, comfortable and secure riding on any street surfaces.
The maximum weight bearing capacity of this skateboard is 110 kg and made with fiber material that provides steady base for its long-lasting performance. It comes with a medium size of 20 x 4 cm. The slip resistant concave deck will help you to balance the board and move comfortably without much effort.
Things we liked:
- The built quality is good and best for beginners.
- Value for money.
- Can be used in all street surfaces.
- Comes with good deck height and helps you to have proper balance and riding.
Things we didn’t like:
- Need to work on wheel movement – getting jammed/stuck while turning.
- The quality of the bearing is not up to the mark.
The Sprugal skateboard comes in skeleton motifs and vibrant color schemes that attracts the kid to make it as their perfect sport equipment to have fun and entertainment. The bigger wheels (size 62 X 38 mm) of this board will offer great speed with proper balance.
The wooden base will add more safety, security and comfort while riding/skating. This quality board with anti-skid wheel will allow you to ride on every surface like streets, pool, parks and everywhere with ease. It comes with various features like non-slip board surface, multilayer maple deck, sturdy baseplate & hanger, ABEC 9+ skateboard bearings, and durable PU brushing wheel.
9-layer cross grained multilayer tight pressed maple wood ply will create a strong board with both sided graphic finishes. The size of the deck is 31X8 inches and it is a double kicktail progressive concave shaped deck and the maximum load bearing capacity is 75 kg.
Things we liked:
- The bigger wheels, the faster the movement. The wheels are designed to move faster, and safer through rough surfaces with proper grip.
- The 9 layered wood ply deck will make it strong and durable.
- It is properly constructed to help the user in sharp turns, slides, pivots and general maneuvering in street skating.
- The aluminum alloy trucks with quality PU bushing and cushion provide you with a smooth riding.
Things we didn’t like:
- The quality of the product is not up to the mark.
- A little bit pricey product.
This Oxelo is an inhouse brand of Decathlon and manufactures best quality skateboards. The ABEC 5 bearings with 54 mm diameter and wheels / truck rubber made of polyurethane (92A) hardness will make the skateboard strong and sturdy for a smooth and effective riding.
The board size of 31 X 7.75 inches to have a comfortable grip and smooth riding. The 7-ply wooden glue laminate board with about 50% Canadian maple aluminum trucks will provide excellent durability and enhance its longevity. The maximum load bearing capacity of this board is 90 – 100 kg. ideal to use for people with intermediate age group of 7 – 18 years.
Things we liked:
- Looks attractive with a beautiful graphic design and finish.
- The metal trucks and polyurethane wheels will give a safe, secure and comfortable riding.
- It is easy to handle and carry it around easily.
- The 7 layers maple ply wood of the deck will make it strong and durable.
- Suits for tricks, flips, ollies, and grinds.
Things we didn’t like:
- Riding on busy or badly paved roads is not recommended, as it causes damage to the wheels and ball bearing.
- A little bit overpriced product.
How to Choose a Skateboard?
While choosing a skateboard you may come across many options. Without proper knowledge, it can be a difficult task to choose among them. That is why, we have assorted all the information below. Read carefully to choose the right one according to your needs.
1. Types of Skateboards
They are categorized into three different types – standard, cruiser, mini and longboards.
This type are the best skateboards for kids. Their length is usually around 22 inches long x 6 or 7 inches wide. They are light in weight and easy to control the motion as well. So, they are perfect beginner tricks like ollies and flips. They are perfect for kids or teens who started learning about balance or cruising.
Standard or full-size skateboards are sized around 31 inches (length) x 8 inches (width). They are suitable for beginners over age of 9 years and adults because it is easy to control the motion of this skateboard. They work well for street skating, skate parks and any other style of skateboarding. They have hard wheels, and are popsicle shaped, featuring both nose and tail that are nearly symmetrical
If you wish to save your money on transit, then we recommend cruisers, as they are smoother, faster, and convenient to roll on rough surfaces. Cruiser skateboards are similar in length as standards, but come in different shapes. They mostly stand on soft wheels, are lighter allowing you to bob and weave through urban obstacles.
If you wish to buy a large and stable skateboard, that makes it easy for you to balance, then we recommend longboards for you. They are also good for mellow cruising, pushing long distances and skating down-hill at high speed. They are sized around 32 inches and have same equal width from tail to noise. They are perfect for people who like speed or want to quickly reach the destination.
Deck is the main component of a skateboard. As it carries your entire weight, it is the next important factor to consider. Suitable deck depends on several factors like…
- Dimensions – Length and width
- Skating style
- Shape of the deck.
We have mentioned a detail description of each factors below.
If you are new to the world of skateboarding, then we will recommend you to buy a skateboard with a width proportional to your shoe size.
If you wear men’s shoe size between 6.5 to 9, then start with a deck that is 7.5 to 8.0 inches wide. But, if your shoe size is larger than 9, then go for a skateboard with deck width between 8.0 to 8.5 inches.
Most of the skateboards available in India come width ranging from smaller size to 10 inches. Below are few general guidelines on size requirements.
|13+ or shoe size of 8 or more||7.5 inch wide or more||Full-sized or standard|
|9 to 12 years||7.25 to 7.3 inches||Mid-sized skateboards|
|6 to 8 years||6.75 to 7.25 inches||Mini skateboards.|
|Below five years||6.5 inches||Micro or mini skateboard|
b. Deck Height
Skateboard decks are usually 31 inch to 33 inch long. One more thing to note is that 33 inch long decks will generally be 8.5 inch wide or more.
Also, decks that are longer than 33 inch will often have a proportionally longer wheelbase (difference between the front and rear wheel). A longer wheelbase keeps you stable and increases your turning radius.
If you are beginner, then Start off with a standard deck of 8.0 inch to 8.38 inch width, that is about 32 inch long. This is a common size, and best for beginners.
c. Skating Style
When it comes to using skateboard, there are two different styles – Transition and Street.
Transition skating is when you ride up and around vertical walls or ramps that transit 90º from the ground. These wave-like obstacles allow skaters to use speed to climb and drop vertically. For transition skating you would need a deck width of 8.38 inches or wider, as that will allow you to remain steady at high speeds.
Unlike transition skating that requires a special set-up, street skating is all about re-purposing your surroundings. Street skaters use benches, ledges, stair sets, and other urban fixtures to skate. To do street skating, you require a more maneuverable deck, so choose a deck between 7.5 inches and 8.25 inches wide. That will have narrow board making it more suitable for street tricks.
Note for Beginners – If you are a beginner unsure of whether to take up transition or street skateboarding, then we suggest you to go for a size between 7.75 inches to 8.38 inches. Also, if you have smaller feet then stay on the narrow side of the scale, and vice-a-versa for larger feet.
d. Deck Shape
Shape of the deck affects the deck’s feel under your feet, and is also responsible for the way the skateboard responds to your movements. Skates come in different shapes and edges. We have mentioned them below for your reference.
- Radial Conclave – It represent deck in ‘U’ shape. Most of the skateboards come in in this shape. They provide better foot grip and suitable for all skating styles and tricks.
- Progressive Concave – It is next version of radial conclave. However, it has steep wall which is perfectly blended with wide based. This provides secure foot area and safe skating.
- W-Concave – It contains an extra curve in the middle. This lets you shift the energy from heel to toe. In this way, you can enjoy precision and briskness while skating.
- Tub – It is also referred as flat-curve. This shape is identical to radical concave. However, it has a sharp angle at the deck rails. This deck maintains feet at flat position and also makes it easy to shift energy.
- Asymmetrical – In this shape, rails are slightly risen at different angles. This provides the user with more power at the heels.
- Convex – Unlike concave shape, they have upward arch. They are perfect for professional who like downhill ride skating.
- Flat – As the deck is flat with no curls, it provides a lot of space for feet which allows the user to perform several skating tricks easily.
e. Deck Material
Most of the decks are made up of wood or plastic. Some of them are even made up of fiberglass and carbon. Wood is the most popular choice as it is cost effective. However, fiberglass and carbon skateboards last very long. But they are bit expensive.
To choose the best skateboard you need to have a fair knowledge of its truck. Trucks are sold in pairs, and are the mechanics that allow your skateboard to turn. The wheels and bearings spin on them. So, if you are a beginner, having fair knowledge about trucks will help you get the right board. Some more important points to note are:
a. Truck Width
The width of the truck should correspond directly with the width of the deck. You don’t want your wheels peeping out of the board or hid completely underneath, both threaten your skating speed. Too narrow truck will be unstable, and too wide a truck can result in shoe to wheel contact while pushing the board.
- 5 inch Hanger/ 129 mm /7.75” Axle skateboard trucks fit decks from 7.5 to 8 inches.
- 25 inch Hanger / 139 mm / 8.0” Axle skateboard trucks fit decks from 8 to 8.5 inches.
b. Truck Height
Just like the width of the truck, even the height of it is equally important. A low truck has a short kingpin (the large screw that holds the truck and wheels together); hence it is able to provide extra clearance on your hanger for grinding, keeps your legs closer to the ground, and stabilizes the truck.
Also, with low trucks you get a better response while you kick and push your skateboard, which makes them an ideal choice for street skaters.
High truck’s kingpin is 5 mm longer than a low truck. They allow greater turning radius and also offer additional clearance between the deck and axle. High trucks are ideal for larger wheels, making them perfect for transition skaters, as large wheels give them the ability to make sharper turns.
Note: If truck specifications are not provided, then they usually considered as high trucks.
Bushings are an integral part of a skateboard truck. These are small cylindrical molds of urethane that allow your truck to turn. Usually all trucks, be it low or high come with bushings already installed. But, you need to replace them at regular intervals.
Bushings are usually bifurcated as per their hardness. A hard bushing will make your truck stiff and stable, but require more effort to turn. Soft bushings will allow the skateboard to turn easily.
But, it’s the stock bushings that come with most of the trucks. They are usually on the softer side. We recommend you to read the product description to know about the type of bushing, or when in doubt contact customer service to ask questions.
Wheels are the soul of a skateboard; hence you have to know about them. The best are urethane wheels, as they are able to grip and rebound, allowing the skaters to carve turns without sliding, and roll over rough pavement without feeling the rough vibrations of the road.
There are two most important aspects of a skateboard’s wheels – size and hardness.
The average size of skateboard wheels falls between 49 mm to 75 mm. A large wheel will go faster and weigh more. It will also raise you and your deck off the ground. A small wheel will weigh less, keeps you closer to the ground, and will be easy to maneuver.
Street skaters will prefer small wheels, as that will allow them to perform flip tricks. Transition skaters will opt for larger wheels as they offer better speed.
Note: If you are beginner, then we recommend to start with wheels that fall within 52 mm to 55 mm bracket. This range helps you learn basic of skating easily.
Hardness of the wheel is measured in durometer. It determines how much grip the wheel has and the amount of shock it can absorb. A softer wheel will compress when in pressure, while a harder wheel compresses less, giving it less grip.
Though a soft wheel creates smoother rides, but skaters usually prefer hard wheels, majorly for their responsiveness. The durometer or hardness is usually measured using ‘A’ scale. The larger the number the higher the durometer, and the harder the wheel.
For example, a 101A will be a very hard skateboard wheel, while 75A would be a soft one.
We suggest you to stick to a wheel that offers around 101A durometer. In fact, anything above 98A will perform well in street and skate parks both.
But is you simply wish to cruise around in your skateboard without bothering much about learning the tricks, then we suggest go for softer wheels between 78A to 90A.
Below is a table representing hardness and suitable purpose.
|Durometer A||Suitable for|
|100A||Skate parks, ramps. But has less grip|
|95A/96A||For cruising and tricks. A little more grip|
|90A/92A||Excellent for cruising and bouncing tricks, good grip|
|85A||Only cruising, higher grip|
Bearing are the small circular devices that allows the wheels to roll, and they are the ones that determine how fast and smooth the wheels will rotate.
Skateboard bearings comprise of five major parts that include Shield, Inner Race, Balls, Retainer, Outer Racer. Generally, a skateboard requires a set of 8 bearings, 2 for each wheel. Most of the times, all skateboard bearings are of the same size, and will fit on any skateboard wheel and truck.
Bearings with higher quality parts are faster and durable. Also, if you are a beginner, you will require the fastest bearing, hence look for a better quality bearing.
Another important aspect while checking bearings is – material. Most of the bearing used in skate boards are made up of either steel or ceramic.
Compared to steel bearing, ceramic bearings are durable, strong and lighter. However, they come under higher price range. If you want cost-effective one, then we recommend to go for steel bearings.
7. Bearing Spacers
Bearing spacers are small metal or plastic cylinders that rest at the center of the skateboard wheel. Their exact spacing is between the two bearings, around the truck’s axle.
This equipment has three major functions:
- Reduce the weight placed on each bearing
- Decrease the friction between each bearing and axle
- Eliminate the extra space between wheels and axle
But, do note that bearing spacers are usually not required for regular street or transition skaters. Unless you are downhill at a speed of 30 mph or more.
8. Bearing Lube
When you use your skateboards continuously, they tend to get dirty, including the bearings. This can cause your skateboard to slow down.
So, what you need is a bearing cleaner that can be availed easily in the market. Apply the bearing lube by first removing your bearings from the wheels, then removing the rubber shield on the outside of the bearing with a razor. You can then squeeze a couple of drops into each side of the bearing.
9. Grip Tape
It is the coarse, applied on top of the skateboard’s deck. The coarseness allows your shoes to stick, helping you to stabilize on the board, especially while performing tricks.
You can find grip tapes with range of graphics. They are sold in pre-cut rectangular sheets or custom lengths in a variety of widths.
If you are buying an exclusive grip tape for your skateboard, then make sure you buy one that is wider than the deck. This will allow you to size it well on the deck.
10. Risers and Shock Pads
Risers are small plastic platforms that act as spacers between the truck’s base plates and the bottom of the deck.
They are necessary for larger wheels, as risers help in creating clearance. By large we mean wheels that are larger than 56 mm.
Shock pads perform the same function as risers, but while the latter is hard and rigid, shock pads are rubbery and able to absorb shock better.
11. Speed Rings
These are thin metal washers that sit on the axle, on both sides of the wheel. Speed rings help in reducing friction between the outsides of the bearings and the axle nut on one side, and the edge of the hanger on the other.
Usually trucks come with a full set of speed rings already installed. Do not worry even if you lose them while using the skateboards, as they are only required when you wish to speed skate at 30 mph or more.
Not all skateboards are made of the same material, and hence their ability to carry weight also differs. We recommend you to take a skateboard that offers the highest capacity. Like if it is for a teenager then one that allows up to 60 to 70 kg weight is good. But, if you are an adult then we advise you to go for a board that can take up to 100 kg weight.
How to Care for your Skateboards?
Here is what you need to do to keep your skateboards safe and in good condition, for long:
Keep your boards indoor when not in use
The first step is to keep your skateboard inside and away from moisture. As the deck is made of wood, and wood soaks in moisture very easily. Also, the moisture outside can even settle into the bearings, rusting them.
Also, if you keep your skateboard in arid places, even then dust will settle on the bearings affecting the performance and speed of your skateboard.
In fact, you should also avoid leaving your skateboards under the sun for long, as it will heat up the metal parts and the grip-tape, making them expand, and when they get cooler they contract.
This process if continued for some time, wears off your skateboard components.
Take care of the chips in the deck
When you crash, or bail, or just lose your board and have it shoot across the street into the light pole, the edge of the deck starts chipping.
To protect the deck from chipping, sand down splintered wood, round off sharp edges, and be vigilant of the tail not becoming thin as a blade.
If there are rips or tears on the grip-tape, clip them out so that the tear doesn’t get big.
Replace the wear-off parts
Eventually you will see flat spots on your wheels, or the deck might start getting stress fractures, you may even while slamming your board into a sidewalk, rip half of its nose.
It is all good, till you replace the bad parts.
Frequently Asked Questions?
1. What is the best brand of skateboard?
Ans: As per recent reviews the best skateboard brands are Oxelo and Razor. We did specifically recommend Oxelo for the beginners. For pros; Razor is a good choice to perform tricks as it is lightweight.
2. How much does a skateboard cost?
Ans: Skateboards can cost anything between Rs. 5,000 to even less than a thousand. It depends on the quality, and also the size of board.
3. Which skateboard is the best for beginners?
Ans: Standard skateboards are considered as the best for beginners. They work well for street skating, skate parks and any other style of skateboarding.
4. What size deck should I get for street skating?
Ans: Choose a deck between 7.5 inches and 8.25 inches wide. That will have narrow board making it more suitable for street tricks.
5. Can skateboards get wet?
Ans: Yes. Skateboards are made of wooden planks, and wood soaks moisture very easily. Which is why you need to be careful and keep your skateboards inside.
Among our top list of skateboards, we pick Strauss Bronx FT Skateboard as our first and best product. The reason is that it has a firm wooden base with excellent finish and the colorful graphics on both sides will make it look attractive and stylish. The high-quality carbon ball bearings, 8-layer maple wood deck, non-slip grip tape, excellent size (31 X 8 inches) will make this skateboard a strong and durable and thereby to provide a smooth and uninterrupted ride.
Hope you got a clear idea on how to choose and which one to pick, as per your requirement. Or still having any queries on its purchase? Then don’t hesitate to ask me through the below comments box. We will reply you as soon as possible.