The 5 Best Bluetooth Transmitter For TV In India Reviews and Buying Guide

A Bluetooth transmitter is an electronic device that helps in transmitting audio from the TV directly to a Bluetooth audio speaker or a Bluetooth headphone.

You can connect the Bluetooth transmitter to the TV using an audio cable and broadcast the audio wirelessly. Some models of these transmitters come with a built-in battery and are small and portable. However, some models are designed to be stationary and can be used with your TV.

Before buying a Bluetooth transmitter for your TV, you should consider the following factors.

Audio Codec:

Audio codec determines the technology that is used to encode and decode the audio. The Bluetooth transmitter that you buy must support aptX if you want to avoid lip-sync issues. Some audio codex that you must check for are:

  • aptX
  • aptX HD
  • aptX Low Latency (aptX-LL)


The range of a Bluetooth transmitter is between 10m to 100m, depending on the Bluetooth version. To decide the range, you can measure the distance between the place where you usually sit and the Bluetooth transmitter. It is better to consider buying one with a maximum effective range.

Audio Output:

Each model of TV comes with a different type of audio output. While some TVs offer both analog (3.5 mm jack or RCA) and digital (USB) audio output, others offer only either one of them. Thus, you should check the output before buying a Bluetooth transmitter.

Bluetooth Technology:

Always remember to buy a transmitter with Bluetooth V4.0 or later versions. This will ensure that the transmitter will offer a good signal quality.

Battery lifeand power source are a few additional factors that you must consider. To learn more about them, check the buying guide at the end of this article.

Here is a list of some of the best Bluetooth transmitters for TV available in the market. Let’s have a look!

5 Best Bluetooth Transmitter For TV In India

Bluetooth transmitters For TVAudio out Operation rangeBluetooth technologyWarrantyBuy Now
Tewtross Bluetooth 5.0 Transmitter For TVDigital and analog output10 meter5.01 yearCHECK ON AMAZON
Musesonic Bluetooth 5.0 Transmitter For TVDigital and analog output10 meter5.01 yearCHECK ON AMAZON
Cubetek Bluetooth V5.0 Transmitter For TVDigital and analog output10 meter5.01 yearCHECK ON AMAZON
Signature Acoustics Bluetooth BT5.0 Transmitter For TVDigital and analog output15.24 meter5.018 monthCHECK ON AMAZON
Haavitek  Bluetooth Transmitter For TVDigital and analog output100 meter5.01 yearCHECK ON AMAZON

5 Best Bluetooth Transmitter For TV In India Reviews

1. Tewtross Bluetooth 5.0 Transmitter and Receiver For TV

tewtross trasnmitter

Our list starts with this Tewtross product. This has a sophisticated designed device and comes with easy handling. It has separate buttons for pairing, power control, set up and use.

The capacity is quite high with its lithium-polymer battery which is integrated within the adapter. And this can last for 26 hours with a single charge. Moreover, this can also remain functional while charging.

This is capable of dual pairing simultaneously and provides personal entertainment.

The Bluetooth 5.0 version and QUALCOMM chipset connects fast and provides high-quality audio transmission and reception with the compatible devices.

Product specification

  • Product dimension: 10.2 x 9.8 x 4.8 cm
  • Product weight: 141 g
  • Bluetooth technology: 5.0
  • Audio output: USB, AUX
  • Transmission range: 10 meters
  • Battery: Lithium Polymer
  • Battery life: 26 hours
  • Compatibility: 2 devices
  • Warranty: 1 year
  • Package includes: 1 Lithium Polymer batteries required.


  • Long battery life
  • High range
  • Includes batteries


  • Doesn’t have many accessories

Buy Now at Amazon

2. Musesonic Bluetooth 5.0 Transmitter and Receiver For TV


Our second product is a digital output based device. So this can transmit and receive signals wirelessly. So you can easily convert your conventional speakers, TVs and home theatres into wireless sound systems.

This has a sleek and compact design. This is portable and can easily fit in any space. It also offers analog output that you can plug in through AUX cable and SPDIF TOSLINK Optical Cable.

This features a Qualcomm CSR Advanced Chipset Bluetooth version 5.0 and this is quite fast and has a long-range of up to 10m. Along with this new version, it is also compatible with V4.x, V3.x, V2.x.

Simultaneously two devices can be connected and it has a long battery life. The adapter is powered by a 450mAh lithium polymer battery and increases the battery life to 20 hours.

Product specification

  • Product dimension: 11.7 x 8.6 x 5.1 cm
  • Product weight: 181 g
  • Bluetooth technology: 5.0
  • Audio out: V4.x, V3.x, V2.x.
  • Battery: Lithium Polymer
  • Battery life: 20 hours
  • Compatibility: 2 devices
  • Warranty: 1 year
  • Package includes: 1 Lithium Polymer batteries required.


  • Compatible with the older version
  • 1-year battery
  • Has dual function


  • Does not come with many accessories

Buy Now at Amazon

3. Cubetek Bluetooth V5.0 Transmitter & Receiver For TV


Cubetek Bluetooth transmitter comes with a circular design that separates it from the rest. This is quite compact and can easily be carried around.

This dual function device can transmit and receive signals with a 3.5mm AUX jack. Just one button can switch the modes from transmitter to receiver. This is enabled with most smartphone and Bluetooth enabled devices.

This also has a low tenancy level ( 95%) as compared to other devices. The time lag is just 40 milliseconds, so this gives you a high definition output without any problems.

Product specification

  • Product dimension: 49 x 13mm
  • Product weight: 12 g
  • Bluetooth technology: 5.0
  • Audio out: A2DP, APT-X LL(TX), APT-X(TX), SBC(TX), SBC(RX)
  • Transmission range: 10 meters
  • Battery: Lithium Polymer
  • Battery life: 14 hours
  • Compatibility: 2 devices
  • Compatible devices: iPhone, Android Phones, TV, PSP, PC, Laptop, Bluetooth Speaker, Bluetooth Earphones
  • Warranty: 1 year
  • Package includes: Bluetooth Audio Adapter, 3.5mm Audio Cable, Micro USB Charging Cable, 3.5mm Female to 2 RCA Male Cable, user Manual


  • Lightweight
  • 1-year battery
  • Low tenancy level


  • Does not have a sturdy design

Buy Now at Amazon

4. Signature Acoustics Bluetooth BT5.0 Audio Receiver & Transmitter For TV

signature apustics

Our fourth product is from Signature acoustics. This 5.0 Bluetooth transmitter works with AUX and SPDIF/Optical Connectivity. It supports aptX, aptX Low Latency and aptX HD. So it has a flexibility of both digital and analog output and you can choose as per your need.

This offers the highest range(15.24 meter) to transmit and receive signals. It delivers a high-quality sound across a variety of devices. You can connect this with 3.5 AUX-in and AUX out SPDIF in and SPDIF and RCA to 3.5 mm. And all these cables come in the box so there is no hassle for buying this externally.

When it comes to its battery you can rest assured with its long battery life. Plus it can be also used while charging.

  • Transmission (AUX) – 16 hours
  • Transmission (SPDIF/Optical) – 14 hours
  • Reception (AUX) – 16 hours
  • Reception (SPDIF/Optical) – 14 hours

And to top it all this product is the first Bluetooth adapter from India to be approved by Qualcomm aptX.

Product specification

  • Product dimension: 5.4 x 5.4 x 1.5 cm
  • Product weight: 36.3 g
  • Bluetooth technology: 5.0
  • Audio out: aptX, aptX Low Latency & aptX HD.
  • Transmission range: 15.24 meter
  • Battery: Lithium Polymer
  • Battery life:  Transmission (AUX) – 16 hours
  • Transmission (SPDIF/Optical) – 14 hours
  • Reception (AUX) – 16 hours
  • Reception (SPDIF/Optical) – 14 hours
  • Compatible devices: Bluetooth Headphones, Home Theater, TV, Laptop, Mobile
  • Warranty: 18 month
  • Package includes: Phoenix Bluetooth Adaptor, 3.5mm Aux Cable, Optical Cable, RCA Cable, user Manual


  • Single pin connector
  • Includes all connecting plugs
  • Wide transmission range


  • The warranty period is less

Buy Now at Amazon

5. Haavitek  Bluetooth Transmitter Receiver For TV

haavi tek

Haavitek transmitter offers the highest range with 100 meters. This works on the Bluetooth 5.0 version and is compatible with aptX HD and Apt devices. With low tenancy levels, the audio lag is eliminated and you hear a high definition sound. This has an optical and AUX connector. It can support both analogue (RCA / 3.5mm AUX audio) and digital (optical) input and output. It’s 3.5 mm AUX cable can be connected to headset ports, stereo, speaker dock and many more.

Product specification

  • Product dimension: 8.5 x 8 x 2.5 cm
  • Product weight: 231 g
  • Bluetooth technology: 5.0
  • Audio out: aptX HD and Apt devices
  • Transmission range: 100 meter
  • Battery: lithium-ion
  • Battery life:  14 hours
  • Compatible devices: smartphones, headset, a car stereo
  • Warranty: 1 year
  • Package includes: 1 Wireless Transmitter Receiver


  • Highest range
  • 1-year warranty
  • High-quality output


  • Does not support Dolby/DTS format

Buy Now at Amazon

Things To Consider While Buying a Bluetooth Transmitter

If you look online, you will find a number of Bluetooth transmitters and most of them offer similar features and functionalities. The design and the price of each one of them are quite similar too.

Hence, it gets even more difficult to buy the best one. Here are some of the important factors that you should check for before buying a Bluetooth transmitter for your TV.

1. Audio Codec:

Audio codec means the type of technology that is used to encode and decode the audio files. It majorly affects the bandwidth and audio transmission. Along with this, it affects the latency of transmission too.

If there is any delay in the Bluetooth transmission, there will be a significant delay in the time that it takes the sound to reach your headphones. Due to this, you might face a lip-sync issue that makes the entire video hard to watch. Here is a table that will help you understand all the options available.

Audio CodecAudio Latency
aptX Low Latency38ms (+ or - 5ms)
aptX70ms (+ or - 10 ms)
aptX HD150ms
Standard Bluetooth220ms (+ or - 50ms)

Some headphones and most of the android devices support aptX Low Latency codec. It can reduce the latency to below 40 milliseconds and thus when you are watching a video, the audio is synced accurately up to the character’s lips. Thus, there is no disorienting lag that can happen when codecs like SBC are used.

If you want to enjoy the benefits of aptX Low Latency, you must ensure that both the sourcing device and the receiving device support it. Usually, Apple devices including AirPods and iPhones don’t support aptX Low Latency.

2. Audio Out:

To connect a Bluetooth transmitter to the TV, you will require a wired connection between the audio output of your TV to the audio input of the Bluetooth transmitter.

Every model of TV features a different type of audio. While some models of TV offer both digital and analog audio output, others offer either digital or analog output. You should be careful to check the type of output that your TV features and make sure that the Bluetooth transmitter is compatible with the audio output otherwise you will have to spend extra money on buying a converter for it to work.

Here are some of the common audio out that the Bluetooth transmitter supports:

Digital Audio Output:

  • Optical Audio (TOSLINK)
  • USB

Analog Audio Output:

  • 5mm jack (AUX)
  • RCA (colored in red and white)

3. Transmission Range:

The transmission range of a Bluetooth transmitter depends on the type of class the device falls in. There are 2 classes of range: Class 1 and Class 2. Class 1 can deliver around 100 meters or 330 feet. Class 2 transmitters, on the other hand, offers a range of up to 10 meters or 33 feet. You will mostly find Class 2 Bluetooth transmitters in the market as it is good for usage at home.

If you are looking for a Bluetooth transmitter with a larger range, you can buy a Class 1 model. However, one thing that you must remember is you can attain a 100-meter range of Class 1 adapter only if there are no obstacles that can dampen the Bluetooth signal.

4. Bluetooth Technology:

You should buy a model of Bluetooth transmitter that comes with the latest Bluetooth technology. If you are buying one with an older or outdated technology, you might have to face issues and compromise with the delivery of the signal to the output. Hence, you must pick a device with either Bluetooth V4.0 version or later versions. This will ensure that you are buying a transmitter that will give you excellent signal quality.

5. Bluetooth Compatibility:

A Bluetooth adaptor is majorly known for the wide range of compatibility that it offers. You should be able to pair it with different devices featuring different OS. Many users prefer buying a Bluetooth transmitter that can be used with both Mac and PC. You should also be able to connect it with different OS versions, starting from Windows XP to Windows 10, Windows 2003, Vista, and ME (32 and 64 bit) and Mac OS apart from your TV and CD/DVD player.

6. Multi-device Pairing Options:

This is an important feature for many users. If there are 2 people in your house who wish to receive the audio at a time, buying a transmitter that can be paired with two devices can be helpful.

Most of the Bluetooth transmitters for TV support this feature by default. You can check for the transmitters that cannot pair two devices in the aptX codex beforehand. You will experience sound-lag issues in such a case while watching a video.

For example, there are few models of Bluetooth transmitters that support aptX HD codex for a single connected device but the same can revert back to SBC when it is connected to two devices.

7. Battery Life (for Portable Models):

Most users these days prefer buying a battery-operated model. While some models use a USB cable for charging purposes, others mostly feature an in-built battery.

If you are buying a model with a battery, you can even use it for outdoor purposes. Hence, checking the life of the battery becomes equally important.

The battery life of most of the Bluetooth transmitters is around 10 to 12 hours. It gives the same battery life even if you are using the transmitter continuously. When it comes to the charging time, it should take about 2 to 3 hours to charge fully. Always prefer buying a transmitter with a longer battery life for uninterrupted service.

8. Bypass Mode:

When the TV audio is connected via Bluetooth, you will not get to hear any sound through the speakers that have a wired connection to the TV. But there might be instances where you might want to revert the audio transmission back to the wired speakers.

In such cases, some Bluetooth transmitters feature a bypass mode that allows the audio connection to bypass the wireless connection and revert the audio to the wired speaker.

9. Display Interface:

As there are so many options of Bluetooth transmitters available, it is very important that you buy one with a display interface so that it can reflect all the options to you. While some transmitters feature only light indicators to reflect the type of codec that you are using, others feature special LED screens that reflect different types of transmission mode, type of codecs, and many more.

10. Functionality:

Before buying a Bluetooth transmitter, it would be good if you check its functionality first. You should buy a model that can deliver the best functionality that too at an affordable price. To understand the functionality, you can check how many devices you can connect to that particular model.

11. Both Transmitter and Receiver Modes:

Even though all the Bluetooth transmitters can beam audio to the headphones, some devices can even receive audio from the phone and pass it via the wired headphones, speaker, or even a car stereo. This way, you might not have to spend extra money to buy a receiver separately. The price of the transmitter/receiver combo is almost the same as that of the transmitter-only models.

12. Power Source:

The power source is another factor that you should consider. We always suggest you to buy a transmitter with a USB power source. It prevents any type of noise from being transferred when used in the battery mode.

If you are using a battery-powered transmitter, you must also keep a watch on the lifetime of the battery as there might be a significant difference between different models.

13. Auto Pairing:

You should prefer buying a transmitter that can automatically re-pair with the known devices. This way, you will not have to pair the transmitter with the devices every time you want to use it.

14. Ease of Use:

Not every user is tech-savvy. Hence, you should buy a device that can be used by everyone easily. It should be easy for you to switch from one function to the other.

15. Price:

You can easily buy a good quality Bluetooth transmitter within a price range of Rs. 2,000 – Rs. 3,000. There are many affordable options available in the market with decent features.

16. Warranty:

It is always suggested to buy a Bluetooth transmitter from a trusted brand as they offer a warranty of about 12 months to 18 months. While buying an electronic gadget, it is very important to buy ones that come with a warranty period.

Difference Between Bluetooth Transmitter and Bluetooth Receiver

A Bluetooth transmitter is used to link a Bluetooth-free computer to a Bluetooth-enabled unit. For example you connect the transmitter to TV and connect the headphones to the transmitter. So now the sound of TV will be connected to your headphones.

Whereas a Bluetooth receiver can connect Bluetooth device to non-Bluetooth devices.

For example, you can connect the phone with the Bluetooth receiver of an audio speaker. So now the song on your phone will play on your audio speaker.

Frequently Asked Questions

1. How many devices can be connected with Bluetooth transmitter?

This would depend on the type of Bluetooth transmitter. If it has a dual audio function, it can connect with two devices.

2. Can Bluetooth transmitter nad receiver be used at the same time?

No, these two functions cannot be used at the same time. When the Bluetooth is in transmission mode then it operates to send signal whereas when it is in receiving mode its operates to receive signals.

3. Can there be an audio lag?

Audio lags are possible with Bluetooth transmitters. Some can lag for a few microseconds and these are negligible and you would not really find any difference. While others can have a predominant delay and this will not be comfortable to use.


On the bottom line a bluetooth transmitter can be a useful device to transmit signals. All the devices mentioned above deliver a high quality performance. All of them were selected on the basis of highest reviews and product efficiency. And among these our best pick is Tewtross Bluetooth 5.0 Transmitter and Receiver For TV. This comes with easy handling and anybody can easily use it. This has the latest bluetooth version- 5.0. It can work for 26 hours on a single charge. And to top it all it comes with a year of warranty.

If there are any further queries, mention it in the comment section below and we will respond to it as soon as possible.